Installation
308371R
9
14. Refer to F
. 4, page 10. Connect the swivel end of
the air hose (21) to the elbow (37).
15. Remove the gear reducer oil level plug (L) from the
street elbow and check the oil level in the reducer
housing. The oil should never be higher than the oil
level plug. If necessary, drain or add oil until the
proper oil level is attained. Screw the oil level plug
back onto the street elbow.
NOTE
: Special high temperature synthetic gear oil is
required for the gear reducer. Use only Graco oil, part
number 217374.
