background image

24

TECHNICAL DATA

Maximum working pressure

8 bar (120 psi)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Air operating range

1–8 bar (15–120 psi)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Air consumption

1.27 m

#

/min (45 scfm)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Intermittent duty delivery

114 liters/min (35 gpm)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Cycles per liter (gallon)

1.11 (4.2)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maximum recommended pump speed

150 cycles/min

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Maximum suction lift

4.57 m (15 ft) dry, 6.71 m (22 ft) primed

. . . . . . . . . . . . . . . . . . . 

Decibel level

75 dBA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Air inlet

1/4 npt(f)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Fluid inlet

1” npt(f)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Fluid outlet

1” npt(f)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Wetted  parts

Models 218–940, 218–942, 220–438 and 220–546:

. . . . . . . . . . . . . . . 

Aluminum, Stainless Steel

Models 220–434, 220–435, 220–436 and 220–545:

316 Stainless Steel

Diaphragms: Buna–N (218–940 and 220–434),

EPDM (218–942 and 220–435),

Polyester Elastomer (220–436 and 220–438),

r

 (PTFE) (220–545 and 220–546)

Balls and O–Rings: Buna–N and Delrin

r

 (218–940 and 220–434),

EPDM (218–942 and 220–435),

(PTFE) (220–436, 220–438, 220–545 and 220–546)

r

and Delrin

r

 

Loctite

r

 is a registered trademark of the Loctite Corporation.

THE GRACO WARRANTY AND DISCLAIMERS

WARRANTY

Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workman-

ship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy

for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the

equipment proven defective. This warranty applies only when the equipment is installed, operated and maintained in

accordance with Graco’s written recommendations. 

This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty instal-

lation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or

substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the

incompatibility with Graco equipment of structures, accessories, equipment or materials not supplied by Graco, or the

improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materi-

als not supplied by Graco. 

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco

distributor for verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any

defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the

equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which

charges may include the costs of parts, labor and transportation.

DISCLAIMERS AND LIMITATIONS

THE TERMS OF THIS WARRANTY CONSTITUTE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND ARE IN LIEU OF ANY OTHER WAR-
RANTIES (EXPRESS OR IMPLIED), INCLUDING WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PUR-
POSE, AND OF ANY NON–CONTRACTUAL LIABILITIES, INCLUDING PRODUCT LIABILITIES, BASED ON NEGLIGENCE OR STRICT LIABILITY.
EVERY FORM OF LIABILITY FOR DIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS IS EXPRESSLY EXCLUDED AND DENIED. IN
NO CASE SHALL GRACO’S LIABILITY EXCEED THE AMOUNT OF THE PURCHASE PRICE. ANY ACTION FOR BREACH OF WARRANTY MUST
BE BROUGHT WITHIN TWO (2) YEARS OF THE DATE OF SALE.

EQUIPMENT NOT COVERED BY GRACO WARRANTY

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS, OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO.

These items sold, but not manufactured by Graco (such as electric motor, switches, hose, etc.) are subject to the war-

ranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for

breach of these warranties.

Graco Product Service: 1–800–543–0339

Factory Branches:

 Atlanta, Dallas, Detroit, Los Angeles, West Caldwell (N.J.)

Subsidiary and Affiliate Companies:

 Canada; England; Switzerland; France; Germany; Hong Kong; Japan

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1444

PRINTED IN U.S.A.  307–729  3–85  Revised 1–89

PTFE

PTFE

PTFE

Содержание 218-940

























Отзывы: