Grace Industries, Inc.
8
Grace industries, Inc. warrants SuperCELL® & related Grace telemetry products to
be free from defects in workmanship and materials for a period of one year from
the date of purchase. This warranty is valid only when the returned product is
accompanied by a sales slip or other proof of purchase that states the date and
location of purchase. Grace Industries, Inc. will not repair or replace any
merchandise under warranty which has been damaged because of accident,
misuse or abuse while in possession or control of the consumer. This warranty is
void if any attempt to repair or replace parts was made or attempted by other than
qualifi ed Grace Industries, Inc. personnel. This warranty is void if any of the sealed
compartments are opened or tampered with. Send all returned merchandise,
prepaid and accompanied by proof of purchase to: Grace Industries, Inc., Repair
Division, 305 Bend Hill Road, Fredonia, PA 16124 USA. Grace Industries, Inc. shall
not be liable for any direct, incidental or other consequential loss or damage arising
out of the failure of the product to operate. End-user or customer is responsible for
return shipping/freight charges.
The sole and exclusive remedy under all guarantees or warranties, express or
implied, is strictly limited to repair or replacement as herein provided. ALL IMPLIED
Warranty Information
WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF FITNESS AND
MERCHANTABILITY, ARE HEREBY LIMITED IN DURATION TO A PERIOD ENDING ONE
(1) YEAR FROM THE DATE OF PURCHASE. The warranty and liability set forth in the
prior paragraphs are in lieu of all other warranties, expressed or implied, in law or
in fact, including implied warranties of merchantability and fi tness for a particular
purpose. Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
This warranty gives you specifi c legal rights and you may also have other rights
which may vary from state to state.
This information is believed to be accurate and reliable. Grace Industries, Inc.
provides this information as a guide only.
Technical assistance is available by contacting Grace Industries, Inc. by
telephone at 724-962-9231, M – F, 8:00 am – 4:30 pm.
For training purposes a copy of User’s Information is available by contacting
Grace Industries, Inc. at www.graceindustries.com or by mail to: 305 Bend Hill Rd,
Fredonia, PA 16124 U.S.A.
305 Bend Hill Road,
Fredonia, PA 16124 USA
www.graceindustries.com
(724)-962-9231
Defi nition of Terms
Alarm Inhibit Timer
: When the SuperCELL® receives an alarm message from
another device, and that alarm is cleared, the Alarm Inhibit Timer provides
a 30 second period of time where the SuperCELL® will not receive another
alarm message from that same device.
Alarm Message
: A radio transmitted signal sent from a SuperCELL®, or
other GRACE Industries telemetry device, when the panic button is pressed
for the purpose of notifying monitoring personnel that an emergency
situation is present and rescue action is requested.
Alarm Mode
: A SuperCELL®, or other GRACE Industries telemetry device, is
placed in alarm mode by pressing the device’s panic button. When this
occurs, the device transmits an alarm signal and emits a loud alarm audio
tone.
Canned Text Message
: Canned Text Messages are pre-programmed, text
based messages that can be sent from one SuperCELL® to another.
Device Name
: The Device Name is a pre-programmed name assigned to the
SuperCELL® device that can be viewed on the Device Name and Run Time
Display page.
Dilution of Precision
: A term used in satellite navigation to express the
positioning accuracy of a GPS device.
GPS Status Icon
: The GPS Status Icon appears on the Icon Line of the Home
Page when the GPS Location feature is active. The icon changes based on
the satellite fi x quality.
Home Page
: The Home Page is the main page of the SuperCELL® that is
displayed on startup and any time the device is reset. Displayed on
this page is the status icons, motion sensing timer, device OEM and ID
numbers, and the fi rmware versions loaded on the device.
Icon Line
: The Icon Line is the display line at the top of the home page that
displays the device status icons.
Man-Down Alarm Mode
: A SuperCELL, or other GRACE Industries telemetry
device, enters Man-Down Alarm Mode when the Motion Sensing Timer
counts down to zero.
Monitoring Authority
: The Monitoring Authority is the person/people
responsible for monitoring the status of the telemetry devices used by the
various on-scene personnel, usually from a centralized base location.
Motion Sensing Activation Icon
: The Motion Sensing Activation Icon
appears on the Icon Line of the Home Page when the Motion Sensing
feature is active. The icon changes as the devices senses motion.
Motion Sensing Timer
: The Motion Sensing Timer indicates the seconds of
lack-of-motion required before the SuperCELL® enters the Man-Down
Alarm mode.
Radio Signal Propagation
: Radio Signal Propagation is the behavior radio
waves exhibit when they are transmitted. Radio Signal Propagation can be
aff ected by structural, environmental, and atmospheric conditions.
Resetting the Device
: Simultaneously pressing the MENU/PWR and SEL/PWR
resets the SuperCELL® and returns the display to the Home Page.
Sensing Mode
: When the SuperCELL® is turned on, it is in Sensing Mode.
In Sensing Mode, the device is monitoring radio traffi
c for alarm
messages and canned text messages. The SuperCELL® is also sensing
motion, if enabled.
Setup Mode
: Setup Mode allows certain characters and functions on the
SuperCELL® to be activated, deactivated, or modifi ed.
Signal Loss
: Signal Loss is an event that occurs when the SuperCELL® is out
of the communication range of a base monitor for a preset length of time.
Signal Loss Activation Icon
: The Signal Loss Activation Icon appears on the
Icon Line of the Home Page when the Signal Loss feature is active.
Unit ID
: The Unit ID is the unique ID number assigned to the SuperCELL®
device for purposes of radio communication. It can be viewed on the
device’s home page.
Unit OEM
: The Unit OEM is a number assigned to the SuperCELL® device,
similar to the Unit ID. The key diff erence is the Unit OEM is not a unique
number to each device. In most applications all of the SuperCELL® devices
will have the same OEM number; from the factory this number will usually
be 9090.
