Grace Industries, Inc.
3
Menu Pages
Pressing MENU button brings up menu pages in the
following order:
Page 1 - Send Message
Page 2 - Alarm History Display
Page 3 - Event Counters Display
Page 4 - Device Name and Run Time Display
Page 5 - Setup Mode
Page 1 - Send Message
The
Send Message function may be used to send
one of 80 user-programmed, canned text messages
.
These messages are programmed into the SuperCELL®
device through the SuperCELL® Database Manager
Utility Program via the ACTiSYS IrDA USB Adapter,
available for the SuperCELL® device. This process is
explained in the IrDA Transfer section, on page 4.
To send a message
, proceed to the
Send Message
page by pressing the MENU/PWR button. Next, cycle
through the messages stored on the SuperCELL® by
pressing the UP, DWN, *, or # buttons until you fi nd the
desired message you wish to send. UP and DWN cycle
the message count by one,
*
and # cycle the count by
fi ve.
Once you have the desired message displayed,
pressing the SEL button transmits the message
, and
a
Mes
sage Sent acknowledgment is displayed on the
screen. Other messages can be selected and sent by
pressing the UP, DWN, *, or #, and then pressing SEL to
send.
Pressing MENU/PWR will navigate away from the
Send Message page. Resetting the device will return the
SuperCELL® to the home page.
Page 2 - Alarm History Display
The Alarm History Display page displays the name
and unit ID of any Grace Industries telemetry product
that has transmitted an alarm message received by
the SuperCELL®.
Proceed to the Alarm History Display page by
pressing the MENU/PWR button. On the Alarm History
Display page, the UP and DWN buttons cycle through
the stored alarm messages that were received by
the SuperCELL®. The 32 most recent, unique, alarms
are stored on the SuperCELL® in the order they were
received.
Turning the SuperCELL® off clears the Alarm
History
.
Pressing MENU/PWR will navigate away from the Alarm
History Display page. Resetting the device will return the
SuperCELL® to the home page.
Page 3 - Event Counters Display
The Event Counters Display page shows the number
of Page (Evacuate), Par, and Roll Call events received
by the SuperCELL® device since it was last turned on.
Navigate to the Event Counters Display page by
pressing the MENU/PWR button.
Pressing MENU/PWR will navigate away from the Event
Counters Display page. Resetting the device will return the
SuperCELL® to the home page. Turning the SuperCELL®
device off resets each counter to zero.
Page 4 - Device Name and Run Time Display
The Device Name and Run Time Display page
displays the SuperCELL® device name
which has been
programmed onto the device through the SuperCELL®
Database Manager Utility Program via the ACTiSYS IrDA
USB Adapter, available for the SuperCELL®.
This page
also displays the length of time the SuperCELL® has
been running (turned on), in days/hours/minutes
.
Navigate to the Device Name and Run Time Display
page by pressing the MENU/PWR button.
Pressing MENU/PWR will navigate away from the
Device Name and Run Time Display page. Resetting the
device will return SuperCELL® to the home page.
Page 5 - Setup Mode
The Setup Mode page allows the user to put the
SuperCELL® into Setup Mode, where the various user
preferences of the device can be changed.
To enter Setup Mode
, proceed to the Setup Mode
page by pressing the MENU/PWR button. Next, press
and hold the SEL/PWR button for three seconds. The
SuperCELL® device is now in Setup Mode.
Press the
MENU/PWR button while in Setup Mode to cycle
