Grace M905, Руководство пользователя, Страница: 5 / 44

5
„
M905 AUDIO CONTROL UNIT REAR PANEL
24
REMOTE TALKBACK SWITCH CUE IN SPEAKER 1 BALANCED IN
L R
TALKBACK MIC IN
S/PDIF AES3
AES 2 AES 1 S/PDIF TOSLINK
UNBAL IN
WORDCLOCK
UPGRADE
ADAT USB 2
SPEAKER 2 SPEAKER 3
1M
75
TALKBACK OUT
SUB/
DAC OUT CUE OUT
L R
L R
DIGITAL IN DIGITAL OUT
RoHS
COMPLIANT
Pb
100-240 VAC / 50-60Hz
60 Watts Max
OUT
IN
L R L R L R L R
L
R
GRACE DESIGN
LYONS, CO USA
1 2 3 4 5 6 7 8 9 10
11
20 21 23
12
16 17 18 19
13
14 15 22
BALANCED IN 2
L R
REMOTE TALKBACK SWITCH CUE IN SPEAKER 1 BALANCED IN
L R
TALKBACK MIC IN UNBAL IN UPGRADE SPEAKER 2 SPEAKER 3
TALKBACK OUT
SUB/
DAC OUT CUE OUT
L R
L R
RoHS
COMPLIANT
Pb
100-240 VAC / 50-60Hz
60 Watts Max
L R L R L R L R
L
R
GRACE DESIGN
LYONS, CO USA
1
AC mains input universal 100-240 VAC, 50-60Hz, 60
Watts max. This connects m905 (with the supplied AC
power) cable to AC power source.
2
Word Clock termination switch used to properly ter-
minate a connection from an external clock reference
source to the m905 Word Clock input.
3
Word Clock input for incoming word clock signals from
a master clock or other equipment passing a master
clock signal.
4
Word Clock output for sending or passing word clock
signals from the m905 to other equipment.
5
Two AES3 input XLR connectors used to receive stereo
AES3, Dual Wire AES3, and DSD64 or DSD128 via DoP
V1.1
6
S/PDIF INPUT RCA jack input accepts a S/PDIF format
digital stereo signal or DSD64 or DSD128 via DoP V1.1
7
TOSLINK INPUT Optical connector accepts a TOSLINK
format digital stereo signal.
8
ADAT INPUT LIGHTPIPE™ connector provides a 2 chan-
nel input selectable in 4 pairs (or 2 pair S/MUX) of an
ADAT format digital source.
9
USB Class 2 interface provides an asynchronous mode
computer interface PCM up to 24bit/196kHz and
DSD64 and DSD128 via DoP V1.1. Configured for two
channels down from computer and 10 channels up to
computer.
10
Digital out provides a buffered digital loop-through of
a selected source via AES or S/PDIF. Can be configured
as a digital speaker output when monitoring digital
PCM input sources.
11
Multi-mode SUB / DAC / Meter output can be used as
either a subwoofer output (mono or stereo), a fixed
level DAC output, or a dedicated meter output. Con-
figurable in the setup menu.
12
Cue out stereo output includes sum of the CUE input
signal with talkback mic signal.
13
Talkback output mono output of talkback microphone
signal.
14
USB upgrade port for future ACU firmware revisions.
15
DB15 Remote connector connects the m905 ACU and
RCU with supplied 15 pin serial remote cable
16
Talkback switch input, momentary or latching opera-
tion, configured in the setup menu.Speaker 1 output
stereo balanced
17
Speaker 1 output stereo balanced
18
Speaker 2 output stereo balanced
19
Speaker 3 output stereo balanced
20
Cue input for studio headphone mixes, sums with
talkback mic signal for CUE output.
21
Analog Balanced Input via XLR connectors.
22
Analog Unbalanced input via RCA connectors. Can be
used with optional RIAA phono input module.
23
External Talkback mic input, for any type of external
microphone, 7-70dB gain, 48V configurable in the
setup menu.
24
m905 Analog Rear panel - digital inputs are not avail-
able - a second set of balanced Analog inputs via XLR
is installed.