manualshive.com logo in svg

Grace M905, Руководство пользователя, Страница: 17 / 44

Поделиться
Скачать
Grace M905 Скачать руководство пользователя страница 17

17

TOSLINK

Selects toslink input

UNBAL

Selects unbalanced analog input

USB

Selects usb input

SPKR 1

Selects Speaker 1 output

SPKR 2

Selects Speaker 2 output

SPKR 3

Selects Speaker 3 output

TALK

In momentary talkback mode, press and hold this button to enable talk-

back, release to disable.  In latching talkback mode press and release to 

toggle talkback state.  Functions as a duplicate of the talkback button on 

the m905 RCU.

PAIR

Enables remote pairing for the Logitech remote

UNPAIR

Disables remote pairing

 

„

ANALOG ONLY OPTION

The m905 is now available without the built in Digital to Analog converter section. The Analog version 

may updated to the Digital version at any time.

•  Inputs are shown across the bottom and are (in this order) balanced, balanced 2, unbalanced and cue 

•  Inputs across the top are dark gray and pressing the associated input button has no response. 

•  The first input button in the upper left indicates “no dac”

•  In SUB/DAC/MTR SETUP, the “dac output” option for output mode is removed

•  DIGILOOP SETUP is removed

•  DIGITAL I/P SETUP is removed

Important Note: 

The m905 Analog ships with a standard ethernet cable for connecting the RCU. This cable 

does not carry the headphone signal to the RCU, so the headphone jack on the RCU will be deactivated and 

a small jack plug will be installed. If you wish to use the headphone jack on the RCU, you will need to buy the 

remote cable upgrade from your Grace Design Dealer or directly from the Grace Design Factory.

 

„

PHONO MODULE OPTION

The m905 phono module is a high performance RIAA preamplifier. This option is available on new and 

existing units, the latter requires the unit to be returned to our factory to be upgraded. If you are an 

overseas customer, please contact your Grace Design distributor for details. 

It can be optimized for a wide range of phono cartridges via a number of internal jumper settings. To 

access these jumpers, remove the top cover of the m905 and refer to the Jumper Location diagrams in 

chapter 18 of this manual. 

Be sure to unplug the AC power cord before removing the m905 top cover. 

10  Setup Mode

 

„

ENTERING AND EXITING SETUP MODE 

Pushing the  ‘setup’ button enters the m905 into setup mode.  This is indicated by the display showing 

the m905 setup mode screen and the setup button flashing white. In this mode, the user can configure 

Содержание M905













































Отзывы:

Нет отзывов