manualshive.com logo in svg

Grace M905, Руководство пользователя, Страница: 4 / 44

Поделиться
Скачать
Grace M905 Скачать руководство пользователя страница 4

4

5  m905 features

•  Analog inputs - unbalanced (standard or the optional RIAA phono input), balanced (2nd pair balanced 

available on m905 Analog) , CUE, talkback mic

•  Digital inputs - 2x AES3, 1 S/PDIF, 1 TOSLINK, ADAT (selectable in 4 pairs, or 2 pairs in S/MUX), USB, AES3 

Dual Wire mode.  AES and S/PDIF connectors support DSD64 or DSD128 via DoP Version 1.1

•  Audio circuitry designed for completely transparent and musical playback performance

•  Asynchronous Class 2 USB playback supports up to 24bit /196kHz and DSD64 or DSD128 via DoP Version 

1.1, configured for two channels down from computer and 10 channels up to computer

•  Mastering quality DAC circuitry with configurable de-emphasis filtering

•  s-lock dual-stage Phase Lock Loop for ultra low jitter clock regeneration

•  Hybrid RCU with hardware switches, large level encoder and graphical LCD

•  LCD display shows input, level, output, SPL and DAC status plus a full calibration menu

•  RCU includes built in microphone for talkback and onboard SPL meter

•  SPL meter features include level, peak, fast and slow modes, A & C weighting

•  Precision .5 dB step level control for speakers and headphones, volume displayed in absolute or custom 

reference level

•  Reference headphone amplifier circuitry, with outputs on both the RCU and ACU

•  Dedicated mono, dim, mute and sub mute switches

•  Mono mode can be set to L+R summed, L only in both channels, or R only in both channels

•  L solo, R solo, L-R and sub solo modes are available

•  3 available stereo speaker outputs, with two assignable mono sub outputs (or single stereo sub output)

•  Digital loop thru outputs that can be configured to pass incoming digital signals or as a digital speaker 

output when monitoring digital PCM sources.

•  Multi-mode SUB/ DAC/ METER out

•  Optional IR (infrared) remote control via Grace Design Remote, Apple Remote or iOS and Andriod with the 

Logitech Harmony Hub Remote

•  SUB out mode for stereo or multiple mono subwoofer outputs

•  DAC out mode for a fixed DAC output fed by the selected digital input

•  METER out mode fed by selected input signal (digital or analog), configurable with a fixed level or to fol-

low the monitor level

•  Detachable RCU tilt base

•  Five year transferrable warranty

Содержание M905













































Отзывы:

Нет отзывов