Assembly of the GraceHoop
²
™ 2005
Hoop Stand - Out of Box, in folded position
Step 1: Remove the stand from the box.
Remove the stand from the box. The stand is preassembled and shipped in a folded position.
(Shown above)
Hoop arm adjustment knob
Step 2: Unfold the arm of the stand
Loosen the hoop arm adjustment knob and raise the arm up and
out completely. Be sure the bolts rest in one of the slots in the
stand.
Re-tighten the hoop arm adjustment knob to secure the arm into
place.
Hoop arm adjustment knob
Step 3: Unfold the back foot of the stand
Next, loosen the knob on the back foot and slide the back foot
down until the bolts are in the position shown below.
Once the foot is in this position, pivot the foot clockwise.
NOTE:
Do not pivot the foot too far! Both sides of the back foot should be
fl ush against the fl oor when the hoop stand is upright.
Slide Back Foot to this position, before
you begin to Pivot it clock wise.
Before You Begin:
Using the parts list as a
reference, make sure all
parts of your assembly are
present. If something is
missing or broken, contact
The Grace Company at 1-
800-264-0644. We will
promptly ship any needed
item.
Tools Needed:
Allen Wrench (provided)
5
