Folding The GraceHoop² 2005 for Storage and Toting
Loosen the front foot adjustment knob.
Pull the front foot out just a bit, so that it is
no longer interlocked with the back foot.
Fold the front foot up to the stand.
Make sure that the foot folds up snuggly
against the stand leg to prevent movement in
storage.
Loosen the arm height adjustment knob.
Position the top screw within the arm into the
highest notch.
The bottom screw slides up the groov in the
stand allowing the hoop to slide in towards the
stand.
Once the hoop is collapsed into the stand, you
may tighten the hoop arm adjustment now to
prevent the arm from moving in storage.
Loosen the back foot adjustment knob.
Rotate the back foot counterclockwise so that the foot is parallel
with the leg of the stand as shown below.
Retighten the back foot adjustment knob to secure it into place
for storage.
* NOTE:
You do not have to remove your hoop for storage. Simply fold the hoop stand as directed
above with the hoop attached for easy storage.
Bottom screw follows this
groove to fold arm in.
Position top screw in this notch
to fold hoop arm down
Bottom screw will slide up the
groove allowing the hoop to fold in.
13
