Grace EASY Скачать руководство пользователя

Страница: 57 / 63

GRACE EASY Manual

Page | 123

9.12.

Frame paint and coating

The coating on the parts of your GRACE EASY protects them from corrosion. Regularly check

all paint surfaces for damage and touch up these surfaces right away. This also preserves the

look of your bike.

10.

Maintenance

When you bought your GRACE EASY your dealer provided you with a service

manual. Please keep to the inspection intervals in the manual for your own safety

and riding pleasure! (Appendix A)

We recommend your dealer performs an initial inspection after 100 kilometres. Spokes,

brakes, gears and bearings may shift position in this run in phase due to the parts breaking

in. Your GRACE dealer knows your bike very well and has the right tools to maintain your

GRACE bike.

After a crash or an accident on your GRACE EASY, you must take your bike to a specialist

dealer for a thorough inspection.

Damage caused by crashes or improper handling must only be fixed by your GRACE

dealer!

The faulty parts, especially forks, handlebars, frame, handlebar stem , saddle post,

pedals or crank arms must be replaced immediately due to the risk of rupture.

11.

Disposal

Waste electrical devices and batteries should never be discarded with the

household waste! They must be separated according to Guideline 2002/96 EC

for waste electrical and electronic equipment and handed over to a

professional collection point for environmentally friendly recycling.

Please take waste electrical equipment at a local collection point. Separate

packaging materials by type and dispose of them according to local

regulations. For details, please contact your local authority.

Never dispose of batteries with the household waste! According to the

guideline 2006/66/EC you are required to remove batteries from the bike and

to hand them over to your dealer, a municipal collection point or other shops

which sell batteries.

Содержание EASY
































































Результаты поиска

Содержание EASY

Отзывы:

Похожие инструкции для EASY

Бренды по названию

Популярные бренды

Grace EASY, Руководство пользователя

Результаты поиска

Содержание EASY

Отзывы:

Похожие инструкции для EASY

Бренды по названию

Популярные бренды