Grace A34 страница 20 Скачать руководство пользователя

Страница: 20 / 22

Installing Fabric on the A34

Step 1. BACKING FABRIC

The first fabric that will be applied to the quilting frame is the

Backing.

The

Backing

is also known as the lining fabric. This piece of fabric will be the under side of the finished quilt.

It is recommend that this piece of fabric be 2” to 4” larger than the top on all four sides, especially if your top is

a pieced top.

(A pieced top may possibly stretch out and become larger than the backing if you do not make this allowance).

The

Backing fabric

can be one continuous piece of fabric or can be made by sewing fabric together.

Piecing the

Backing fabric

Cut the selvedges before you piece the back fabric together. The selvedge is woven more tightly

than the rest of the fabric and won’t have the same “give” as the rest of the fabric which can cause the

seam to be too tight. Use a slightly larger machine stitch than used in normal sewing when piecing the

lengths of the back fabric together. Many quilts have

Back

fabrics

that are not one continuous piece of

fabric and are pieced together using two fabric pieces with a seam down the middle or three fabric pieces

with two seams having been sewn. You can also sew

your back fabrics together using crosswise piecing.

Front Pole

–Backing fabric

1. Mark the center of

Backing fabric

with a pin or a

pencil mark.

2. Pin the center mark to the center of the front pole

cloth leader. (The

Backing

fabric

is put on with the

wrong side of the fabric up and facing you.)

3. Lay the fabric naturally and evenly along the

straight edge of the pole.

Do not stretch the fabric

Pin the corners of the fabric to the cloth leader on

your pole.

4. Add a few more pins to hold the material on the

clother leader on your pole.

Middle Pole

–Backing fabric

1. Ping the other end of the

Backing

fabric

to the

middle quilting pole, centering with the mark as

directed on the front pole.

2. Pin the center mark to the center of the middle pole’s cloth leader.

3. Lay the fabric naturally and evenly along the straight edge of the middle pole. Do not stretch the

fabric. Pine the corners of the fabric to your cloth leader.

4. Measure the amount of your rail that is showing at the edges of the fabric to the end boards. This

measurement should equal the amount

showing on the front pole.

5. Securely pin the

Backing

fabric

along the entire edge of the middle

pole’s cloth leader, using plenty of

pins.

Back Pole

Middle Pole

Front Pole

Backing

Back Pole

Middle Pole

Front Pole

Backing

Содержание A34























Результаты поиска

Содержание A34

Отзывы:

Похожие инструкции для A34

Бренды по названию

Популярные бренды

Grace A34, Руководство пользователя

Результаты поиска

Содержание A34

Отзывы:

Похожие инструкции для A34

Бренды по названию

Популярные бренды