Grace Industries MX900-H Скачать руководство пользователя страница 119

Страница: 119 / 179

119

User Sort Priority

All users monitored on the Monitor screen are sorted real-time in the user name list by status

priority, i.e. users with the highest status priority are sorted to the top of the list.

The following is an explanation of the various status priorities on the In-Command System sorted from

highest priority to lowest priority:

Alarm Status:

Second highest priority.

No Signal Status

Abandon Status:

(Abandon Commanded, Sent, Received, and Acknowledged)

Evacuation Status:

(Evac Commanded, Sent, Received, and Acknowledged)

Roll Call Status:

(Roll Call Commanded, Sent, Received, and Acknowledged)

PAR and Auto PAR Status:

(PAR Commanded, Sent, Received, and Acknowledged)

Withdrawn Status:

in Mode 2.

NOTE: In Mode 1, this status will be sorted below Off status.

User On Status:

in Mode 2.

NOTE: In Mode 1, this status will be sorted below Off status.

User Off Status:

in Mode 2.

NOTE: In Mode 1, this image will be sorted above the On status images.

Alarm Cleared Status:

has no effect on the sort order of the user on the monitor screen.

No Signal Cleared Status:

Lowest priority score of all online status images.

Micro-Repeater:

Always displayed below normal users in the same system ID range.

Non-Active User:

Users that have not checked into the system; always sorted below the users that

have checked into the system with any status listed above.

Return to TOC

Содержание MX900-H




















































































































































































Результаты поиска

Содержание MX900-H

Отзывы:

Бренды по названию

Популярные бренды

Grace Industries MX900-H, Информация пользователя

Результаты поиска

Содержание MX900-H

Отзывы:

Бренды по названию

Популярные бренды