Grabo OTTOVAC, Руководство оператора

Страница: 7 / 55

7
OTTOVAC | Operator’s manual
OTTOVAC BY GRABO®
INTRODUCTION
The OTTOVAC is a portable electric vacuum lifting device intended to lift and move glass
and any other material that has a smooth, flat and non-porous surface. The OTTOVAC
has a built-in pressure sensor with an automatic start/stop function. When the vacuum
in the base of the suction cup reaches -55 kPa, the pump will automatically stop after a
three-second delay. When the vacuum level drops below -55 kPa, the pump will
automatically restart, reaching the required pressure during operation. The OTTOVAC is
not intended:
l
to be used for climbing or securing the human body in any way. This product is not
designed or intended for climbing or to support a person’s weight. Using this
product for climbing or any other unintended purpose may result in injury or death.
l
to lift, move, or place objects consisting of very porous, soft/flexible, and crumbling
materials, such as simple cardboard boxes, styrofoam, dry cast pavers, compressed
sand, or bad quality concrete.
! Read this instruction manual carefully before use and save it for future reference ➋
TECHNICAL SPECIFICATIONS
Electric vacuum lifting device OTTOVAC
Model OTTOVAC-V1(OV-V1)
Batteries Alkaline AA 1.5 V (x 4)
Working voltage 6 V
Rated power 6 W
Running cycles 1,500 ON-OFF cycles of 10 seconds
Pump service life > 10,000 ON-OFF cycles, 800+ hours
continuous
Rated airflow 4 l/min
Maximum vacuum rate -0.7 bar (-70 kPa)
Maximum lifting capacity 200 kg (440 lbs)
L x W x H 200 x 200 x 90 mm
Net weight (with battery) 1.2 kg (2.6 lbs)
Working temperature 0–60°C (32–140°F)