Grabo OTTOVAC, Руководство оператора

Страница: 18 / 55

18
4. When you have finished, press the power ON/OFF button
Ⓑ
to turn off the motor.
5. Press the Pressure release button Ⓐ to break the seal and release the object.
WARNING: When the batteries are low, the indicator light will flash green and red.
Using the OTTOVAC while the batteries are low may result in injury and damage to the
materials being lifted. It is advisable to check that you are using fully charged batteries
before using the OTTOVAC.
INSERTING AND CHANGING THE BATTERY
❺
1. Press the Battery compartment release button
Ⓒ
to release the Battery
compartment Ⓕ .
2. Insert 4 x AA alkaline batteries (not included) in accordance with the markings on the
Battery compartment
Ⓕ . If you do not adhere to the markings, the OTTOVAC will
not work.
3. Put the loaded Battery compartment Ⓕ back into the OTTOVAC.
4. Press the Power ON/OFF button Ⓑ to turn on the OTTOVAC.
WARNING: The Battery compartment Ⓕ will not eject automatically when there are
no batteries inside. Press the Battery compartment release button Ⓒ and pull the Battery
compartment
Ⓕ
out when you insert the batteries for the first time.
WARNING: Using the OTTOVAC while the batteries are low may result in injury and
damage to the materials being lifted.
WARNING: Only use genuine batteries from major brands.
WARNING: Take the batteries out when the device is not in use to avoid battery
leakage and corrosion of the circuit board.
EXPLANATION OF VISUAL INDICATORS
l
Red indicator light: The OTTOVAC is equipped with a thermal protection system to
extend its service life. If the temperature of the motor/PCBA is between 50–60°C,
the red light will flash quickly and the device will operate normally. However, if the
temperature exceeds 60°C, a continuous red light will illuminate and the OTTOVAC
will not work.
EN
FR
ES