10
aCCESSOriES
– not contained in standard accessory supply
CaUTiON:
When the seat-board pad with
bag is fitted, paddling in kneeling position is
not possible.
►
Oars and rowlocks
- Rowlocks can be
attached individually on the eyelet lip.
Fitting
• Remove the black knurled nuts and take
the pieces apart.
• Feed the part with the bolts through the
eyelets into the desired position on the
eyelet lip.
• Place the second part from the inside onto
the bolts and fasten the knurled nuts firm-
ly.
• Push the oar with the rowlock into the
rowlock-socket.
NOTiCE:
The socket is supplied with a se-
curing bolt!
When not in use, the oars may be secured to
the eyelet lip by means of a line.
►
inboard bag -
water tight bags with
welded seams and semi water proof zip,
fit to the sea board eyelets or D-rings by
means of straps.
►
Spraycover -
protects against spray, rain
and cold
►
Boat Trolley -
for convenient transport
ashore
►
insert floor
– provides stability and re-
sists torsion
►
Trimaran sail rig
- for ultimate sail-
ing experience
IMPORTANT:
There is an abundance of useful accesso-
ries for your boat. For information refer to
the accessory programme contained in the
GRABNER-INFLATABLE BOAT CA-
TALOGUE, or
www.grabner.com
When using the boat on your own, we recom-
mend to move forward and counter balance
(luggage, fuel-tank...) to the bow, or to use a
tiller extension.
WarNiNG: Poor trim may dangerously
destabilise the boat and may cause loss of
boat control!
iMPOrTaNT NOTiCE:
Due to the narrow beam, the SPEED does
not posses the same stability attributes as
an inflatable craft with a wider beam would.
For that reason takes due care not to steer ab-
ruptly and do not make any sudden turns or
unbalanced throttle movements whilst travel-
ling under engine. Furthermore, no weights
should be shifted in the boat when it is mo-
ving at speed. Such would adversely affect
the trim of the boat. Also avoid steering tight
curves when moving at high speed.
Drain valve
To evacuate water from the boat.- Bailing
entails automatic draining of water shipped
inboard. Bailing though functions only, when
the boat is moving faster (suction) than the
speed of the water, on which the boat moves.
Close the valve by pushing the rubber stop-
per (smooth side) from the outside into the
valve firmly.
►
Midship seat-board
- accommodatead-
ditional person
►
Seat-board bar
- for low seat position
►
Seat-board pad
- for soft seat comfort
►
Comfort-seat
- with high aspect rear pa-
nel for best back support.
►
Seat-board pad with bag
- for comfort
and on board tidiness
