Page 6/ 35
To start up the GPS_DESIGNER, you should take the unit outside and find an
open area where the built-in antenna has a clear view of the sky.
Turning the GPS_DESIGNER on
1. Press
POWER
key until you hear a sound of
“
B
”
and the Welcome page appears.
2. Press
ESCAPE
key continuously, the four main pages come out in order. Press
ENTER
key from some of these main pages, you can enter MENU page and start operation as
stated below.
Turning the GPS_DESIGNER off
Press and hold
POWER
key for about 3 seconds until the screen goes blank.
Turning the back-lighting
In any step of the operation, just press
POWER
key to turn it on and off.
N
N
O
O
T
T
E
E
：
When you use the unit for the first time, it
will take 5 minutes to track the satellites and fix
position for the unit. After the first use, it will only take
you less than one minute at the beginning for each
time .
If batteries do not have enough power to support the
unit operation at the very beginning, the unit will alarm
and turn off in about two minute automatically.
Reference
Start up the unit
PDF created with pdfFactory Pro trial version
www.pdffactory.com
