GB
Charging the panel light
1. Remove the waterproof cover and plug in the provided USB-C charging cable into the
USB-C port.
2. Connect USB-A end of the cable into a power source such as USB power adapter, power
bank or computer.
3. The panel light is fully charged when all battery indicators are lit.
4. Disconnect the USB-C cable from the panel light and re-insert the waterproof cover.
Operation
• Press the On/Off button to cycle through the 3 brightness settings: Low - Medium - High - Off
Battery details
• Built-in 3.6V Li-Ion battery (5100mAh)
• Charging time: 5 hours
Usage and Care
• Do not dismantle the product, as this can cause harm to the product and the person will void the
warranty.
• This has a high lumen output so be careful not to shine directly into anyone’s eyes as it may cause
harm and injury.
• Do not cover product when in operation to avoid excessive heat accumulation.
• The battery is sealed and cannot be replaced for your own safety.
• Do not use cleaning agents that may damage the product. Use a soft cloth to avoid scratching.
• This product uses sealed Li-ion 18650 battery. Always connect the USB carefully to avoid water
and other liquids getting into the port, which may cause damage to the unit and batteries.
• Please charge every 3 months if not used to maintain battery longevity.
• Do not leave panel light on permanently charge status as this can cause battery damage.
ANSI FL1 Standard
High
Medium
Low
Lumens
1200 lumens
700 lumens
250 lumens
Candela
494cd 210cd 100cd
Beam distance
45m
29m
20m
Runtime
4.5h 7h 17.5h
IP Rating
IPX7
Impact resistance
1.5 m
60%+
40%+
20%+
0%
80%+
Battery indicators
Battery power capacity
Charge status
0-25%
26-50%
51-75%
76-99%
100%
