GP Systems BioSmart PV-WTC-EM, Руководство по установке

Страница: 10 / 24

10
7.2.Description.of.connection.ports
A.view.of.the.terminal’s.circuit.board.is.shown.in.fig..3..The.circuit.board’s.contacts.are.described.
in.table.1.
Figure.3..Exterior.view.of.terminal’s.circuit.board
1...2..3..4...5...6..7..8.........9
11..12
10
Table 1. Circuit board connectors
No. Label Description Connection purpose
1 REL 1st.relay.normally-open.contact.output.(DC.1A,.12V) Actuator.control.input
2 REL 2nd.relay.normally-open.contact.output.(DC.1A,.12V) Actuator.power.supply.output
3 WG1 Wiegand.interface.DATA1.output
Wiegand.external.controller.interface.
DATA.1.intput
4 WG0 Wiegand.interface.DATA0.output
Wiegand.external.controller.interface.
DATA0.intput
5 IN+ +12V.output.for.discrete.input Relay.control.button
6 IN Discrete.input Door.sensor.output,.relay.control.button
7 485- -.interface.of.RS485.connection.with.BCR -485.BCR.contact
8 485+ +.interface.of.RS485.connection.with.BCR +485.BCR.contact
9 X3
Mini.USB.connector.for.terminal.configuration.using.
the.BioSmart.Manager.program.
Computer.USB.port
10 X4 RJ45(8P8C).port.for.Ethernet.network.connector Ethernet.network.interface
11 GND Power,.ground Ground.of.12V.power.supply
12 +12.V Power,.+12V +12V.power.supply