![GoWISE USA GW22616 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/gowise-usa/gw22616/gw22616_instruction-manual_2248393008.webp)
- 7 -
•
Allow sufficient space around the cooking area to avoid hazards, and pay
attention to the Warnings & Safeguards noted above.
•
Always attach electric cord to appliance first; then insert the cord plug into a
suitable outlet. Three dashes will blink repeatedly on the display.
•
To turn the power on, press the OFF button once. The dashes will
disappear and the fan will start up.
•
If there is no cookware or if you are using unsuitable cookware on the
cooktop, an “E0” will appear on the display and will reset after 1 minute and
30 seconds.
•
To select the proper Power setting, press the “Power ON” button and a red
light next to {W} will turn on as well as below one of the power settings. Use
the left and right arrow buttons at the bottom to change power settings. The
power wattage ranges from 800-1800 watts.
•
To set temperature, press the “Temp ON” button and a red light next to {ᵒF}
will turn on as well as above the temperature settings. The temperature
ranges from 140ᵒ - 464ᵒ F.
•
To set the timer, there are two buttons below the display. They are
labeled “10 MINS” and “1 MIN”, you can use either button to set the
timer, you can set it in increments of 10 or 1 minute at a time. The time
ranges from 0 – 180 minutes.
•
The Timer will automatically start after 5 seconds
•
Press the OFF button to turn off the unit when you are finished cooking.
•
When cooking time reaches 120 minutes without time setting, the cooktop
makes a beeping
sound, and enters standby mode. The fan will continue running
the unit.
NOTICE:
•
The cooktop makes a beep sound, and enters standby mode automatically
if the Temp or Heat function has been in use for a full 120 minutes, even
if the Timer was not set.
•
The Timer setting can be changed during operation with the “10 MINS” or
“1 MIN” buttons, up to the maximum allowable time since the unit was
started. For example, if you use the unit with the Temp or Heat function for
10 minutes and then set the Timer, the Timer will allow a maximum setting
of 170 minutes.
NOTE: The power will completely shut off within 1 minutes 30
seconds if either (a)
the wrong type of cookware is applied, or (b) no cookware is placed on the unit.
Press the " POWER ON" or" TEMP ON" button to restart
until the unit has cooled.