ITS Camera System - Installation and User Manual
2650 Biscayne Boulevard, Miami, Florida 33137 | 305-937-2000 | www.GovComm.us | [email protected]
© GovComm, Inc. 2017
24
2. Set the HTTP port, RTSP port and port of the ITS Camera.
»
HTTP Port:
The default port number is 80.
»
RTSP Port:
The default port number is 554.
»
HTTPS Port:
The default port number is 443.
»
SDK Port:
The default port number is 8000.
3. Click
Save
to save the settings.
3.3.3 Configuring PPPoE Settings
Purpose:
If the user has no router but only a modem, the user can use Point-to-Point Protocol over Ethernet
(PPPoE) function.
Steps:
1. Enter the PPPoE Settings interface:
Configuration > Network > PPPoE
2. Check the
Enable PPPoE
checkbox to enable this feature.
3. Enter
User Name, Password,
and
Confirm
password for PPPoE access.
Note
: The User Name and Password should be assigned by the ISP.
4. Click
Save
to saveand exit the interface.
3.3.4 Configuring DDNS Settings
Purpose:
If the ITS Canera is set to use PPPoE as its default network connection, the user can use the Dynamic
DNS (DDNS) for network access.
Before starting:
Registration on the DDNS server is required before configuring the DDNS settings of the ITS Camera.
Steps:
1. Enter the DDNS Settings interface:
Configuration > Network > DDNS
