15
EN
2. Wipe the kettle with a clean, damp cloth. Rinse out the kettle with a little mild de-
tergent and clear water.
Attention! No water must get into the contacts on the
bottom of the kettle!
This could cause a short circuit.
3. On the bottom of the base station (
4
), wind up or unwind the mains cable to the length
you require. Then place the mains cable into the slot which is provided for it on the
edge of the base station (
4
).
4. Place the base station (
4
) on a dry, heat-resistant,
fl
at surface a suf
fi
cient distance
away from
fl
ammable objects.
5. Plug the mains plug into a properly installed plug socket.
6. Fill the kettle up to the
MAX
marking with drinking water and allow it to boil (see “Use”
). Pour this water away and repeat the process twice.
The kettle is now ready for operation!
Use
ATTENTION!
■
Do not operate the device without water or with less water than is required to reach
the
MIN
marking. If this does happen, the device switches off automatically. In this
case, allow the device to cool down before cold water is poured in and the device is
used again.
1. If you have not already done so, place the base station on a dry,
fl
at, solid and
heat-resistant surface and plug the mains plug into a properly installed plug socket.
2. Remove the kettle from the base station (
4
). Press the button for opening the lid (
1
)
and open the lid (
9
). Pour drinking water into the kettle (
6
). Attention! The amount of
water must be between the
MIN
and
MAX
marking.
3. Close the lid (
9
) and place the kettle on the base station (
4
).
4. Select one of the following functions
A
Boil water:
– Press the
START
button. The device switches on and heats the water up to 100°C.
The
100°C
button
fl
ashes.
B
Heat up water:
– If you do not want the water to boil but merely to be heated to a speci
fi
c temperature,
press the button for the temperature you want and then press the
START
button.
The corresponding temperature button
fl
ashes. The device switches on and heats
the water up to the set temperature.
B
Boil / heat water and keep it hot:
– Press the button for the temperature you want, the
Warmhalten (keep hot)
button
and then the
START
button. The device switches on and heats the water up to the
temperature you want. The corresponding temperature button
fl
ashes. The device
switches on and heats the water up to the set temperature. The heating function
is then switched off, but the device keeps the water hot for 40 minutes: The water
is repeatedly reheated as soon as it starts to cool down. As long as the keep-hot
function is activated, the
Warmhalten (keep hot)
button is lit up.
The boiling process can be aborted at any time by pressing the
START
-button.
07956_DE-EN-FR-NL_A5_V1.indb 15
07956_DE-EN-FR-NL_A5_V1.indb 15
30.06.2017 13:44:55
30.06.2017 13:44:55
Содержание 07956
Страница 2: ...07956_DE EN FR NL_A5_V1 indb 2 07956_DE EN FR NL_A5_V1 indb 2 30 06 2017 13 44 41 30 06 2017 13 44 41 ...
Страница 34: ...07956_DE EN FR NL_A5_V1 indb 34 07956_DE EN FR NL_A5_V1 indb 34 30 06 2017 13 45 08 30 06 2017 13 45 08 ...
Страница 35: ...07956_DE EN FR NL_A5_V1 indb 35 07956_DE EN FR NL_A5_V1 indb 35 30 06 2017 13 45 08 30 06 2017 13 45 08 ...
Страница 36: ...07956_DE EN FR NL_A5_V1 indb 36 07956_DE EN FR NL_A5_V1 indb 36 30 06 2017 13 45 08 30 06 2017 13 45 08 ...
