EN
18
Troubleshooting
If the device stops working properly,
fi
rst check whether you are able to correct the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause/solution
The device does not
work.
• Was the device recently used? It has overheating protec-
tion which prevents the device from being switched on
again directly after a brewing process for safety reasons.
After a brewing process, you should therefore wait for a few
minutes until the device has cooled down before you start
another brewing process.
• Is the plug inserted in the socket correctly?
• Is the socket defective? Try another socket.
• Check the fuse of your mains connection.
• Is the device switched on?
• Is there suf
fi
cient water in the water tank?
The device does not
brew any coffee or
the device brews
very slowly.
• There is no water in the water tank.
• The
fi
lter is not
fi
lled.
• The device needs to be descaled (see the “Care” chapter).
Technical Data
Model:
CM4313AM-GS
Article:
Z
01284
Voltage supply: 240 V~ 50/60 Hz
Power:
900
W
Protection class: I
Fill volume:
max. 1 l
Disposal
The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices.
You can obtain more information from your local authorities.
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost varies
depending on the service provider.)
All rights reserved.
