45
EN
for every 15 additional minutes. However, do not exceed the
MAX
mark. To enhance
the
fl
avour of food, e.g. broth or a mixture of water and wine can also be used instead
of water.
3. Place the mixing bowl in the motor unit.
4. Place the steamer adapter on the mixing bowl. Follow the instructions in the chapter
“Using the accessories properly”, section “Steamer unit”. In the process, make sure
that the adapter is correctly seated.
5. Fill it with the desired food that is not packed down. Make sure that some of the vents
are not obstructed to allow the steam to rise. If necessary, insert the intermediate
panel in the steamer adapter.
6. Place the lid on the steamer adapter. Make sure that it is correctly
fi
tted to prevent too
much steam from being released and food from being improperly cooked.
7. Turn on the motor unit (by
fl
ipping the On/Off switch to position
I)
.
8. Set the cooking time and temperature, which the liquid in the mixing bowl should be
heated to.
9. Push the button and the device will start working. You can also switch on the
cross-blade adapter to the speed level
1
to
2
.
10. If, before the set cooking time has elapsed, you would like to check whether the food
is done, push the
button to stop the device and the timer.
11. Gently tip the lid forward so that the steam can escape to the back. Make sure that
the condensation drips into the steamer adapter by holding it in the middle over it. You
can then carefully remove the lid.
12. To remove the steamer adapter, turn it slightly counterclockwise. Lift it, wait a few
seconds until the steam condenses and has dripped into the mixing bowl before you
place it on a heat-resistant base.
13. If you would like to continue steaming,
fi
t the steamer unit back on the mixing bowl
and push the
button. The timer will continue to run.
14. To turn off the device, set the On/Off switch to the
0
position and then pull the mains
plug out of the socket.
15. Take the steamer unit off of the mixing bowl as described with step 12. Then carefully
lift the mixing bowl out of the motor unit and pour the hot water out.
Weighing
ATTENTION!
■
Make sure that the device is arranged in a stable position on a level work surface with
the suction feet
fi
rmly attached to ensure the scale is able to display the measure-
ment results as accurately as possible.
You can weigh up to 2.5 kg on the scale. It also has a tara function. With the
scale
button, you can switch the scale on and off as well as activate the tara function.
1. Turn on the motor unit by
fl
ipping the On/Off switch on the bottom of the motor unit
to position
I
.
2. Place what you would like to weigh on the scale.
3. Push the scale button and the weight will appear in grams.
00052_de-en-fr-nl_A5_V2.indb 45
00052_de-en-fr-nl_A5_V2.indb 45
24.08.2016 12:29:15
24.08.2016 12:29:15
Содержание 00052
Страница 2: ...00052_de en fr nl_A5_V2 indb 2 00052_de en fr nl_A5_V2 indb 2 24 08 2016 12 29 07 24 08 2016 12 29 07 ...
Страница 106: ...00052_de en fr nl_A5_V2 indb 106 00052_de en fr nl_A5_V2 indb 106 24 08 2016 12 29 25 24 08 2016 12 29 25 ...
Страница 107: ...00052_de en fr nl_A5_V2 indb 107 00052_de en fr nl_A5_V2 indb 107 24 08 2016 12 29 25 24 08 2016 12 29 25 ...
Страница 108: ...00052_de en fr nl_A5_V2 indb 108 00052_de en fr nl_A5_V2 indb 108 24 08 2016 12 29 25 24 08 2016 12 29 25 ...