Before using your 3 in 1 Sweet Snack Maker for the fi rst time make
sure that it is thoroughly clean and dry. Please follow the cleaning
instructions on page 5 of this user guide.
Before using your 3 in 1 Sweet Snack Maker for the fi rst time make sure you:
•
Remove the 3 in 1 Sweet Snack Maker from its packaging.
•
Clean the baking plates with a soft, damp cloth and then thoroughly dry.
•
Always coat the baking plates in a little oil before every use.
•
Completely unwind the mains cable.
•
Place the 3 in 1 Sweet Snack Maker on a dry, level heat resistance surface away from
any other appliances or objects.
•
Your Sweet Snack Maker is now ready to use
1. Make sure that your 3 in 1 Sweet Snack Maker is clean and dry.
2. Position your Maker on a fl at surface or table close to a plug socket.
3. Insert your chosen pair of baking plates by lining them up and clicking them into place.
Always make sure that you do this whilst the machine is cool and turned off .
4. Plug the power lead into a suitable plug socket.
5. Close your 3 in 1 Sweet Snack Maker and pre-heat it for a few minutes. The green and
red light will be illuminated to show that the machine is preheating, when the green
indicator light switches off , the machine is hot enough to use.
6. Once ready to use make sure that each cavity of your chosen baking plates has been
coated with an oil spray.
7. REMEMBER that the baking plates are very hot; do not touch these with your hands.
8. Add your chosen batter or mixture to each cavity on the bottom baking plate.
9. Do not overfi ll each cavity; remember that your mixture will expand with cooking.
10. Carefully close the lid, clip shut the lid latch and allow your sweet snacks to bake for at
least 3 minutes before checking them.
11. Steam will come out of the machine as your food cooks, this is normal.
12. During cooking, the temperature regulating thermostat maintains an even
temperature. You may therefore notice the indicator light fl ickering.
13. After 3 minutes you can open the machine to see how your food is cooking. You can
test to see if your snacks are ready by inserting a toothpick into the middle of one; if it
comes out clean they are ready. If not simply close the lid for another 1-3 minutes.
14. Once your snacks are ready switch off the machine and leave to cool for a few minutes
before removing with a wooden, silicone or plastic utensil.
15. Get creative and decorate your Cake Pops, Doughnuts or Cupcakes, you can fi nd
suggestions at www.gourmetgadgetry.com
3 in 1 Sweet Snack Maker features
Before using your 3 in 1 Sweet Snack Maker
Operating your 3 in 1 Sweet Snack Maker
3 in 1 Sweet Snack Maker Parts:
•
Top and bottom casing
•
Premium non-stick baking plates:
Cake Pop, Cupcake and Doughnut
•
Power and ready lights
•
Lid catch
•
Spring load function for inserting
and removing baking plates
3
4
Cake Pop Plates x 2
Power (red) & Ready (green) Lights
Lid Catch
Top & Bottom Casing
Please refer to page 4 for instructions on operating your Retro Diner 3 in 1 Sweet Snack Maker.
PRODUCT SPECIFICATION:
MODEL NO: SW237
AC220V-240V/50Hz 700W
Cupcake Plates x2
