Goulds e-SV, Инструкция по эксплуатации, Страница: 3 / 64

3
e-SV Product Line
Numbering System for 1 – 22SV Liquid End Only
The various versions of the e-SV line are identified by a product code number on the pump label. This number is also the catalog number for the pump.
The meaning of each digit in the product code number is shown below. Note: Not all combinations are possible.
Example Product Code
22 SV 0 2 F E 3 0
Special Configurations (optional Characters)
A = Jacketed Seal only J = Horizontal mount + Passivation
B = Jacketed Seal + Passivation K = Horizontal mount + Low NPSH
C = Jacketed Seal + Low NPSH L = Horizontal mount + High Pressure
E = Electro-Polished N = Low NPSH only
F = Destaged - 1 stage P = Passivation only
G = Destaged - 2 stage S = Customized Configuration
H = Horizontal mount only Z = High pressure only
Seal Material
0 = Carb-SilCar-Viton (Standard)
1 = Carb-SilCar-AFLAS (HighTemp)
2 = SilCar-SilCar-Viton
4 = SilCar-SilCar-EPR
6 = Carb-SilCar-EPR
Pole-Hz-Phase
1 = 2–50 3 = 2–60
2 = 4–50 4 = 4–60
Motor Frame (NEMA)
A = 56C E = 280TC
B = 180TC F = 320TSC
C = 210TC G = 360TSC
D = 250TC H = 140TC
Configuration
C = Clamp-316 P = Victaulic-316 R = (SVC) 12Suct-12Disch
F = Round-304 (SVB) T = Oval-304 (SVA) W = (SVC) 12Suct-03Disch
G = CI-304 X = (SVC) 12Suct-06Disch
N = Round-316 (SVD) Y = (SVC) 12Suct-09Disch
Total Number of Impeller Stages (may be 1 or 2 characters)
Product Line:
SV – Stainless Vertical
Nominal Flow:
1 = 5 GPM 10 = 53 GPM
3 = 16 GPM 15 = 80 GPM
5 = 26 GPM 22 = 116 GPM
Suction
discharge
location
Top / Bottom