11
hold it until the device switching off.
If you turn off the device by pressing the button on the switch cable, or just simply cut off the power supply, the
setting would not be saved.
Three ways of output
◆
HDMI output
•First, make sure that the monitor to which the microscope is connected is a high definition monitor, otherwise
the image will not be able to achieve 1080p.
•Then, power on the microscope and connect it to the HD monitor. The microscope does not have a built-in
battery, so make sure the microscope is always powered on when in use.
•Third, turn on the microscope, place the object on the base and adjust the focus and object distance.
•When the microscope is connected to another display device, the video signal will be switched to that device.
Therefore, when you use the HDMI output, it is normal that there is no image on the microscope's own screen.
•In HDMI mode, you can take pictures, but not video.
◆
USB output
Software Installation
＊
Download the software first:
https://rb.gy/dmapd0
https://bit.ly/33JvL7k
So far the measuring software “Andonstar” can only support Windows system. If you can’t open the links or get
problem with downloading these files, please ask customer service to send you separately. You can also go visit
our website and download from there.
*System support:
Windows XP SP3, Windows 7,Windows8,Windows10
*Process circumstances
：
Microsoft.Net Framework 4.0
Microsoft Visual C++ 2010 Runtime
If there isn't either of the runtimes above mentioned, there would be mistake during installation.
＊
Open the zip file that you’ve download and run it.
Software Operation
*
Icons Definitions
