- do not exceed the allowable continuous operation time of the device
- do not move or slide the device while it is operating
- while the device operation it is not allowed to put fingers or tools into the dispenser’s tunnel - only the pusher
may be used for pushing the products
- while making juice from harder products one shall not allow for the device operation longer than 40 seconds
at a time and make sure that the device does not overheat
- do not use the device if the power cord is damaged or when the device fell or was damaged in another way
- the device may be used only with original accessories
- the manufacturer is not responsible for possible damages which were caused as a result of improper and
inconsistent with the manual use of the device
- the equipment may be repaired only by authorized servicing centre. All modernizations or application of other
parts than original spare parts or the device elements is not allowed and does not assure the safety of
operation.
- Better Product Sp. z o.o. is not responsible for possible damages present as a result of
improper device usage.
DEVICE ASSEMBLY
The assembly of the device shall be started from proper
placement of the gasket in the container (5) in the way
specified on the figure above. Negligence may cause flooding
of the device engine.
Further on, the device has to be assembled pursuant to the
above figure.
The accuracy of the device assembly guarantees safety of
operation and durability of the device.
Before each assembly of the device it is necessary to check
whether all the elements are in good condition, whether
they are not broken or damaged. The active elements of the
device such as worm (2), filter (3) scrapers (4) and
container (5) are subject to natural wear and are not
covered by the guarantee. They can be bought from the
manufacturer’s servicing centre.
Do not move the device by means of holding the
container!
