Gotharman Little deFormer Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 66

Gotharman Little deFormer Скачать руководство пользователя страница 9

Assign button

Push this one time, so the Assign LED is lit, to select a sampling for the last pushed step button.
Push any step button, to view what sampling is assigned to it, and use the inc/dec buttons to select
another sampling

Push it one more time, so its LED is flashing, to mute/unmute any of the 32 sequencer tracks, by
pushing the step buttons.

9 – 16 button

When on the preset select screen, this button swithes between sample 1-8 and sample 9-16
triggering, via the step knobs.

On sequencer step programming screens, it toggles between step 1-8, 9-16, 17-24 and 25-32. When
reaching step 17-24 its LED flashes slow, when reaching step 25-32, it flashes fast.

On the sequencer track mute/unmute screen, it is also possible to access track 17-32 in a likewise
manner.

Freeze – Start/stop button

Pushing this button freezes the audio content of the time and pitch effect. If a preset is stored, with
this button active, the frozen audio content will be stored together with the preset as a sampling, and
re-loaded the next time you select that preset. The Freeze LED is Flashing to visualize the delay
time of the selected time & pitch effect.

When the Assign LED is lit or flashing, or when a sequencer edit page is selected, this button
functions as sequencer start/stop.

The 8 Edit Knobs

Edits up to 8 parameters at a time on the various edit pages. When on the Preset select page, or the
edit group select page (explained later), these knobs sends out a selected MIDI CC number, both to
the MIDI OUT and internally. Parameters assigned to be controlled by ”Kn1-8” will be affected,
when turning these.

The 8 Step Buttons

On most pages, these triggers the sampling assigned to them. On the sequencer track on/off page,
they toggles each sequencer track between on and off stage, and on the sequencer pages they step
grid program the sequencer tracks.

«
...
7
8
9
10
11
...
»

Содержание Little deFormer



































































Отзывы:

Нет отзывов