Gotharman Little deFormer Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 66

Gotharman Little deFormer Скачать руководство пользователя страница 20

Auto-chop

If you have recorded a sampling, that contains more than one sound, t.ex. a beat or different
variations of the same sound, or just a lot of different sounds in one sampling, you might want to
trigger one sound at a time. You can, of course, adjust the start point and length of each sound
manually and re-save them, as described earlier in this manual, but that is rather time consuming.
Instead you might want to use this auto-chop function. It detects the start point of each single sound,
adds a chop mark, and lets you select each sound using the ”Chop” parameter.

It does not do anything to the sampling itself. It just creates a table of chop points, which the chop
parameter then uses to find the startpoints very fast.

To do this, make sure that the sampling you want to auto chop was the last sample that you
triggered using the step buttons. If you are not sure, please trigger it, using the step button.

Push the ”Edit” button.

The display will read:

After a short while, this screen will appear:

It is now possible to test the chop points. Push the step button, the chopped sampling is assigned to,
to audition. Push ”inc” and ”Dec” buttons to select the chop to audition.

If you are satisfied with the result, just push ”Exit”, and go to the ”Chop” parameter to play with the
newly created chops.

If you are not satisfied with the result, you might need to adjust the 2 parameters, and retry by
hitting ”Exit” and ”Edit” again.

The parameters:

Sens –

0 to 255. Adjust how loud the level of the sample audio should be, before it detects a start

point. If it creates too many chop points, turn this parameter up a bit. If it creates too little or no
chop points, lower this parameter.

AUTO CHOP >
PUSH <edit>

Analyzing…

Sens . Dec . Sample
39 2 1

«
...
18
19
20
21
22
...
»

Содержание Little deFormer



































































Отзывы:

Нет отзывов