Gotharman Little deFormer Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 66

Gotharman Little deFormer Скачать руководство пользователя страница 53

FLASH pages

In this parameter group, there are no real parameters. It is mostly for service purposes, for updating
Little deFormers firmware, and for checking out on available sampling memory.

# Of Samples –

0 to 999. Shows the number of samplings present in the FLASH memory.

% Avail –

0 to 100.

Shows the amount of available FLASH memory in percent, for new sample

recordings. Since Little deFormer has 100 minutes of total sampling time, 1% equals 1 minute.

FLASH ID –

This should show the hex number: ADDC109554. If it doesn’t, the Little deFormers

internal FLASH memory might be damaged, and it needs service.

# Of Bad Blocks –

If this number is higher than 20, the FLASH memory might need to be replaced.

If it reads 255, it is really not good.

FORMAT FLASH – Push <edit>.

If the power goes off, while you are doing a recording, it will

create a mess in the internal FLASH memory. Use this function to ”clean up”. It will only clean up
unused spaces of the FLASH memory, so no samplings or presets will be erased.

Test Display:

If you have more than 4 samplings stored, this display MUST show 4 numbers. The numbers might
not be the same as shown, but they MUST increase as shown. If not, there might be a loose
connection between the DSP processor and the FLASH.

XMIT OS1? / XMIT OS2?

If you want to keep a backup of the Little deFormer firmware, before you update it, you can use
these functions. Connect a MIDI device that is capable of recording .syx files (Like a pc with MIDI-
OX installed), and push ”Edit” to activate.

UPDATE OS?

For updating Little deFormers firmware. Complete procedure is described later in this manual.

0000 0006
0020 0030

«
...
51
52
53
54
55
...
»

Содержание Little deFormer



































































Отзывы:

Нет отзывов