Gotharman Gotharman's Little deFormer 3, Руководство по обновлению

Страница: 23 / 32

23
On each page you will view 16 of the samplings, that are held in the LD3 FLASH memory, Bank A,
B, C or D.
Touch A, B, C and D to select the sample bank, touch PREV and NEXT to view the previous or next
16 samplings.
To select a sampling, touch the sample name.
A small red square is shown near the sample name of the sampling, that are the last one, that was
added to the bank.
When you have found the right sampling, touch OK to return to the Synth Part Sample Select page.
Now you have assigned a sampling to the currently selected part. You can now play it back, by
triggering the part from its trigger button, a connected MIDI device, and from the sequencer.
If a stereo sampling is selected, a few extra steps are required, to get LD3 to output both audio
channels from this. These steps will be explained on the following pages.