Gotharman Gotharman's Little deFormer 3, Руководство по обновлению

Страница: 17 / 32

17
Chop Mode parameter
LD3 has different modes, for automatically generate non-destructive chop points on a sampling. It
can create chop points by peaks, wave cycles or by dividing the sampling into a fixed number of
equally sized chops.
The parameter on the Sample Chops page, that was named Wave in previous OS versions, was
renamed to Mode in V 8.15, but somehow this change didn’t make it to the user manual.
The following chop modes, that determines how LD3 will chop a sampling, can be selected:
Peak: It will generate the chop points from peak detection, according to the settings of the Sens
and Dec parameters.
Wave: It will generate the chop points from zero point detection, according to the settings of the
Sens and Dec parameters. When auditioning chops in this mode, the playback will be looped.
A number between 2 and 64: It will divide the sample length by the selected number, and
generate equally sized chop points from that, regardless of the settings of the Sens and Dec
parameters.