GMC-I Messtechnik GmbH
9
Special measuring leads the connection plugs of which are protected
against accidental contact (lead set KS 17) as well as all leads with
banana plugs (4 mm diameter) can be plugged onto the sockets.
Melting fuses
for measuring circuit (see also chapter 5).
Potentiometer
for full scale deflection
setting when measuring resistance
4.2
Starting the Instrument
Installing the battery
➭
To install or replace the battery, the battery compartment must be opened.
Attention!
!
Remove the measuring leads from the measuring circuit prior
to removing the cover of the battery compartment!
➭
Close the instrument.
➭
Put a coin or a similar object into the slot between the case and the
cover of the battery compartment and press
down
.
➭
Open the instrument completely and remove the cover of the bat-
tery compartment.
➭
Install a 9 V flat cell battery into the battery compartment.
Attention!
!
Only use a leak-proof, 9 V flat cell battery, per
IEC 6LR61, if
possible!
➭
Reattach the cover of the battery compartment and press onto it
until it engages.
Checking the mechanical zero
Put the multimeter into its position of use, turn off switch and check
the mechanical zero position of the pointer. Correct with the adjust-
ment screw, if required.
