manualshive.com logo in svg

Gossen MetraWatt MAVOWATT 210 ROGOWSKI, Руководство по эксплуатации

Поделиться
Скачать
Gossen MetraWatt MAVOWATT 210 ROGOWSKI Скачать руководство пользователя страница 37

Gossen Metrawatt GmbH

MAVOWATT 210

34

7.4.3

Restore Factory Defaults

There are three options to restore MAVOWATT 210's settings to its factory 
defaults. 

1. Select 

Factory.

2. Select one of the three options:

–

Restore Factory Default (Keep IP)

Restores the factory settings but keeps the data and IP address set-
tings as is (unchanged).

–

Restore Factory Default with Data Purge (Keep IP)

Restores the factory settings and purges all data, but keeps the IP 
address settings as is (unchanged).

–

Restore All Settings to Factory Default (incl. IP)

Restores all factory settings including the IP address, and also purges 
the data.

Note!

Depending on the selected option, instrument settings, recorded data, 
and/or the IP address will be deleted from the instrument. 

You will be prompted to confirm that you would like to proceed. 

3. Click 

OK

 to continue or click 

Cancel

 to abort.

7.4.4

Restart

Restarting will reboot the instrument, and when completed, the instrument will 
resume monitoring if monitoring was previously turned on. No settings or data 
files are lost when restarting. 

1. To restart the instrument, select 

Factory

 > 

Restart

.

Содержание MAVOWATT 210 ROGOWSKI

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды