manualshive.com logo in svg

Gossen MetraWatt MAVOWATT 210 ROGOWSKI, Руководство по эксплуатации

Поделиться
Скачать
Gossen MetraWatt MAVOWATT 210 ROGOWSKI Скачать руководство пользователя страница 19

Gossen Metrawatt GmbH

MAVOWATT 210

16

6

Installation

6.1

Unpacking the Instrument

1. Carefully remove instrument and accessories from the packaging.
2. Check delivery for completeness and possible damage.
3. In case of detected damages, hidden defects and short deliveries, docu-

ment type and scope and contact the manufacturer or supplier immedi-
ately.

4. Keep packing material for further transport.

6.2

Power Supply

The instrument can be powered via an AC power source or by an internal 
rechargeable battery.

The instrument will always operate on the AC power source (when available) 
and is designed to do so regardless of the state of charge of the battery.

Attention!

!

Always set the power switch to the 

Off

 position before connecting or dis-

connecting the input power cable.

Note!

Operation of the MAVOWATT 210 from an AC voltage source other than 
the rated voltage input stated on the instrument nameplate can cause 
damage to the instrument.

Note!

Always charge the battery fully before using the instrument.

1. Connect the AC adapter/battery charger plug to the DC input of the instru-

ment.

2. Connect the appropriate power cord for the voltage rating of the instrument 

to the AC adapter/battery charger.

3. Plug the AC adapter into an AC power source.

The indicator LED on the AC adapter lights up green.
The instrument is supplied with AC power.

6.3

Setting up the Connection to the Integrated Web Server

The MAVOWATT 210 has an integrated web server for configuring the instru-
ment and real time data checking (remote control).

Содержание MAVOWATT 210 ROGOWSKI

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды