Gossen Metrawatt GmbH
13
9
Maintenance
Front Panel / Housing
No special maintenance is required for the hous
-
ing. Keep outside surfaces clean. Use only a cloth
for cleaning, which has been slightly dampened
with water. Avoid the use of cleansers, abrasives
and solvents.
Note!
According to DIN VDE 0701-0702, measur
-
ing instruments used for periodic testing
must be tested and calibrated in accordance
with the manufacturer’s specifications on a
regular basis. Depending upon usage, the
manufacturer recommends an interval of 1
to 3 years for this test instrument.
Device Return and Environmentally Compatible Disposal
The instrument is a category 9 product (monitor
-
ing and control instrument) in accordance with
ElektroG
(German Electrical and Electronic Device
Law)
. This device is subject to the WEEE directive.
Furthermore, we make reference to the fact that
the current status in this regard can be accessed
on the Internet at www.gossenmetrawatt.com by
entering the search term WEEE.
We identify our electrical and electronic
devices in accordance with WEEE 2012/
19/EU and ElektroG with the symbol
shown to the right per DIN EN 50419.
These devices may not be disposed with the
trash. Please contact our service department
regarding the return of old devices.
10
Repair and Replacement Parts Service, Calibra
-
tion Center and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service-Center
Beuthener Straße 41
90471 Nürnberg • Germany
Phone: +49 911 817718-0
Fax:
+49 911 817718-253
E-Mail [email protected]
www.gmci-service.com
This address is only valid in Germany.
Please contact our representatives or subsidiaries
for service in other countries.
11
Product Support
If required please contact:
Gossen Metrawatt GmbH
Product Support Hotline
Phone: +49 911 8602-0
Fax:
+49 911 8602-709
E-Mail [email protected]