Operators
manual
Gorter-Controls B.V. – Schoonhoven- The Netherlands
Operators manual underground gas pressure reducing station
Type: COCON 26 N-LP
Page 3
1.Introduction
This manual has been compiled to help you install, adjust and maintain the gas pressure reducing station.
It answers the most recurring questions about the gas pressure reducing station and it explains how to
replace several parts easily. The manual is for operators who are qualified in assembling and operating gas
installations.
This manual has been divided into six chapters, in order to give the operators easy access to the required
information.
-
Chapter 1 -
Introduction
-
Chapter 2 -
General
gives general information concerning the gas pressure reducing
station.
-
Chapter 3 -
Safety
describes how to operate the gas pressure reducing and safety unit
safely.
-
Chapter 4 -
Operator
the installation of the casing and the adjustment of and
maintenance
to the gas pressure reducing and safety unit.
- Chapter
5
- Options
is a description of the options with which the station can be
equipped.
-
Chapter 6 -
Additional data
contains various lists to help you find the required information in this
manual.
This gas pressure reducing station is the result of years of development. Development is still in process. We
will inform you by mailing about developments concerning this type of gas pressure reducing station.
Definitions
p
1
= Inlet pressure
p
2
= Reduced pressure
p
= Differential pressure (p
1
-p
2
)
CR
= Closing rate
MR
= Monitoring rate
Q =
Capacity
Note
If pages of the manual become unreadable due to damage etc., you can order new pages from
GORTER-Controls
. Do not forget to state the manual version, the type of gas pressure reducing station and
the serial number. The version number is printed at the cover of this manual.
