25
MDE-LEDI160S-1012V1.0
5.
OPTIONS
5.1. TIMER OPTION
A switch is provided to move from the clock function to the chronometer (timer)function.
There are two possible uses in timer mode:
►
Stopwatch
►
Count-down
OPERATION :
A set time may be displayed if wished.
5.1.1. Stopwatch function
No set time :
►
Press “
START/+
”. The timer will begin from zero and continue indefinitely until the
“
STOP
” button is pressed.
With set time :
►
Press the “
PROG
” button (this function can only be used when the timer is stop-
ped at zero) and set the required time using the “
+
” and “
-
“ buttons (each time the
“
PROG
” button is pressed, part of the display begins to flash; adjust the hours,
minutes and seconds in succession).
►
When programming is completed, press on the “
START/+
” button. The timer will
begin at the time programmed and continue indefinitely until the “
STOP
” button is
pressed.
5.1.2. Count-down
No set time :
►
Press “
START/-
”. The timer will begin from zero and continue
for 24 hours or until the “
STOP
” button is pressed.
With set time :
►
Press the “
PROG
” button (this function can only be used
when the timer is stopped at zero) and set the required time
using the “
+
” and “
-
“ buttons (each time the “
PROG
” button is
pressed, part of the display begins to flash; adjust the hours,
minutes and seconds in succession).
►
When programming is completed, press on the “
START/-
”
button. The timer will begin at the time programmed and stop
automatically at zero, and then redisplay the set time.
ENGLISH