23
MDE-LEDI160S-1012V1.0
3.2. WATERPROOF CASE:
All connections are made to the back of the case without opening it. Perform connections
according to the markings on the wires.
►
Connect the 230VAC 50-60Hz supply.
►
Connect the synchronisation input and the optional accessories (ASCII input, chro-
nometer, etc.)
☛
Attention: this clock must be a receiver, it cannot stand alone, and it
has no manual luminosity adjustment.
3.3. PIVOTING CASE TO BE PLACED ON A TABLE:
►
All connections are made without opening the case. Perform connections according
to the markings on the wires.
►
Connect the 230VAC 50-60Hz supply.
►
Switch the battery main switch
SW1 to the ON
position
(lower position).
☛
Attention: If clock display remains off, wait a few minutes for the
internal battery to charge.
ENGLISH