Gorenje VCK 1800 WF, Инструкция по эксплуатации

Страница: 24 / 58

23
•
During use keep the suction tube, suction
hose and nozzles away from your head to
prevent injuries.
•
For longer use pull out at least 2/3 of the
cable length to awoid overheating and
damage.
•
Do not use a vacuum cleaner on the site.
Absorbed building material can damage
your appliance.
•
The appliance fulfils the applicable German
and European electrical standards as well
as the radio interference suppression
regulation.
•
When you are using the vacuum cleaner
together for several hours, pull the
connecting cable to the end.
Vacuum cleaner use only for home and in the
inner rooms!
Do not use a vacuum cleaner in very dirty
places, it will immediately obstruct HEPA
filter!
Connection to the mains
supply
Check, please, whether the voltage stated on the
data plate comply with the data of your house
mains supply.
Supply cord
If the supply cord is damaged, it must be
replaced with the suitable cord, or a set for
coiling the cable, which you can get in the
nearest Gorenje’s service outlet.
Data on compliance with
european standards
Test for this type of appliance confirmed that it
complies with the following European directives:
•
73/23/EEC Low voltage
•
93/68/EEC CE Marking
•
89/336/EEC Directive on Electromagnetic
Compatibility– EMC
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment
(WEEE). This guideline is the frame of a
European-wide validity of return and
recycling on Waste Electrical and
Electronic Equipment.
Elimination of the appliances
and environment
If one day you decide to change your appliance,
or you just do not need it any more, think about
the environmental protection.
Vacuum cleaner assembling
Always remove the plug from the power supply
before fitting or removing accessories. Before
putting the appliance into service, please check if
all filters are inserted correctly.
1.
Press the locking button and Remove the
water container from the appliance, holding
it by the handle of the water container
(fig.1).
2.
Remove the filter unit inclined by the two
slip locking buttons of the water container
(fig.2).