Gorenje KC621USC, Инструкции по использованию, установке и подключению

Страница: 18 / 24

467522
• When connecting the appliance to the gas supply, follow the
regulations of the local gas distributor.
• On the lower side, the cooking hob is fi tted with a gas connection
plug with a EN ISO 10226-1/-2 or EN ISO228-1 (Depending on
the country-specifi c connection regulations.). thread.
• Also supplied with the appliance is an adapter for liquid gas
and a non-metal gasket.
• When connecting, the knee R1/2 should be held fi rmly to
prevent it from rotating.
Connection
NOTE:
Connection bridges are already installed on their respective
places on the clip. Screws of the connection terminals are open,
which means they do not have to be unfastened or unscrewed
any further. When fastening the screws, you may hear a slight
‘click’, which means that the screws should be fastened /
screwed in completely.
The following can be used for connection:
• Type H05 RR-F 4×1.5 rubber connection cables with a green-
yellow protective wire,
• Type H05 VV-F 4x1,5 PCV isolated connection cables with
yellow-green protective wire, or other equivalent or superior
grade cables.
• The appliance must be connected in compliance with all relevant regulations, and it may only be
used in well ventilated / aerated rooms. Before connecting or using the appliance, please read
the instruction manual.
• Before installing and connecting, make sure the local natural gas supply network and connection
(type of gas and pressure), are compatible with your appliance version.
• The version of this appliance is indicated on the rating plate.
• This appliance is not suitable for connection to a burning fumes exhaust system (i.e. a chimney).
The appliance must be installed and connected in compliance with the relevant eff ective
installation regulations. Special care must be taken to ensure adequate ventilation / aeration.
Important warnings
18
Connecting the cooking hob to the gas supply