Gorenje KC621USC, Инструкции по использованию, установке и подключению

Страница: 11 / 24

467522
Models with two gas burners:
• Operate the gas burners using the knobs on the hob. Power
levels are indicated on the knobs by large and small fl ame
symbols (see section Appliance description).
• Rotate the knob through the large fl ame position ( ) to the
small fl ame position ( ) and back. Operation interval lies
between the two fl ame symbols.
• Gas burners can be ignited using the electric spar plug built
into each gas burner (only available with some models).
Before rotating the knob, it should fi rst be depressed.
Single-handed ignition
• In order to ignite the gas burner, press the selected burner
control knob and rotate it to the maximum power (fl ame)
position. An electric spark will be generated automatically,
igniting the releasing gas.
• If the electric ignition should not work due to a power failure or
damp spark plugs, the gas can also be ignited using a match
or a gas lighter. After igniting the gas, keep the control knob
pressed for another ten seconds, until the fl ame settles.
• The fl ame can then be set between the maximum and
minimum level. Any setting between ( ) and ( ) is not
recommended, as the fl ame is not stable in this interval and
may be extinguished.
If the burner hasn’t ignited after the knob has been
depressed for fi fteen seconds, close the burner and
wait at least one minute. Then, repeat the ignition
process.
If the burner fl ame is extinguished (for any reason),
close the burner and wait at least one minute before
attempting to re-ignite it.
• To extinguish the fl ame and close the burner gas supply, rotate
the control knob to the right, to the ‘OFF’ position ( ).
Ignition and operation of
the burners
11
Operating the gas burners