Gorenje KAT35MINV, Руководство по установке

Страница: 40 / 112

12
INSTALLATION INSTRUCTIONS
•
50~55 mm deep at the selected positions
on the ceiling. Then embed the
expansible hooks (fittings).
•
Face the concave side of the installation
hooks toward the expansible hooks.
Determine the length of the installation
hooks from the height of ceiling, then cut
off the unnecessary part.
•
If the ceiling is extremely high, please
determine the length of the installation
hook according to facts.
•
Cut the installation hook open in the
middle position, then use appropriate
length of reinforcing rod (
Φ
12) to weld
together.
•
The length could be calculated
fromFig.17: Length=210+L (in general,
L is half of the whole length of the
installation hook).
c. Please adjust the hexangular nuts on the
four installation hooks evenly, to ensure the
balance of the body.
•
Use the transparent hose filled with
water to check the lever of the main
body from the four sides or diagonal
line direction, the lever indicator also
can check the lever from four sides of
the main body Refer to Fig.18).
•
If the drainpipe is awry, leakage will be
caused by the malfunction of the water-
level switch. Adjust the position to
ensure the gaps between the body and
the four sides of ceiling are even.
•
The body's lower part should sink into
the ceiling for 10~12 mm(Refer to
Fig.17).
•
Locate the air conditioner firmly by
wrenching the nuts after having
adjusted the body's position well.
Picture 16
Picture 17
New built houses and ceilings
a. In the case of new built house, the hook can
be embedded in advance (refer to the A.b
mentioned above). But it should be strong
enough to bear the indoor unit and will not
become loose because of concrete
shrinking.
Picture 18
Picture 19
Picture 15