12
CARE AND MAINTENANCE
Care and maintenance
IMPORTANT:
•
Be sure to unplug the unit before cleaning or
servicing.
•
Do not use gasoline, thinner or other chemicals
to clean the unit.
•
Do not wash the unit directly under a tap or
using a hose.
It may cause electrical danger.
•
If the power cord is damaged, it should be
repaired by manufacture or its agency.
1. Air filter
•
Clean the air filter at least once every two
weeks to prevent inferior fan operation
because of dust.
•
Removal
Take the upper filter out along the arrow
direction, and then take the filter down.
•
Cleaning
Wash the air filter by immersing it gently in
warm water (about 40°C/104°F) with a neutral
detergent. Rinse the filter and dry it in a shady
place.
•
Mounting
Install the upper air filter after cleaning, and
install the lower filter by using the screw.
2. Unit enclosure
•
Use a lint-free cloth soaked with neutral
detergent to clean the unit enclosure. Finish
with a dry, clean cloth.
3. Unit idle for a long time
•
Remove the rubber plug at the back of the unit
and attach a hose to drain outlet. Place the
open end of the hose directly over the drain
area in your basement floor.
•
Remove the plug from the bottom drain outlet,
all the water in the bottom tray would drain out .
•
Keep the appliance running on FAN mode for
half a day in a warm room to dry the appliance
inside and prevent mold forming.
•
Stop the appliance and unplug it, wrapped the
cord and bundle it with the tape. Remove the
batteries from the remote Clean the air filter
and reinstall it.
Upper air
filter
(remove)
Lower air
filter
(remove)
