9
OPERATING INSTRUCTIONS
Operating instructions
COOL operation
1. Press the "MODE" button until the "COOL" indicator light comes on.
2. Press the ADJUST buttons "+" or "- " to select your desired room
temperature. The temperature can be set within a range of 17°C – 30°C /
62°F - 88°F.
DRY operation
1. Press the "MODE" button until the "DRY" indicator light comes on.
2. Under this mode, you cannot select a fan speed or adjust the temperature.
The fan motor operates at LOW speed.
3. Keep windows and doors closed for the best dehumidifying effect.
4. Do not put the duct to window.
FAN operation
1. Press the "MODE" button until the "FAN" indicator light comes on.
2. Press the "FAN SPEED" button on remote controller to choose the fan
speed. The temperature cannot be adjusted.
3. Do not put the duct to window.
SLEEP / ECO operation
Press this button on remote controller, the selected temperature will increase by
1°C / 2°F 30 minutes. The temperature will then increase by another 1°C / 2°F after
an additional 30 minutes. This new temperature will be maintained for 7 hours
before it returns to the originally selected temperature. This ends the Sleep/Eco
mode and the unit will continue to operate as originally programmed.
NOTE: This feature is unavailable under FAN or DRY mode.
Other features
Auto – Restart (on some models)
If the unit breaks off unexpectedly due to the power cut, it will restart with the
previous function setting automatically when the power resumes.
Wait 3 minutes before resuming operation
After the unit has stopped, it cannot be restarted operation in the first 3 minutes.
This is to protect the unit. Operation will automatically start after 3 minutes.
POWER MANAGEMENT feature
When the ambient temperature is lower (Cooling mode) or higher (Heating mode)
than the setting temperature for a period of time, the unit will be automatically
operate power management feature. The compressor and fan motor stop and the
power management indicator light illuminates. When the ambient temperature is
higher (Cooling mode) or lower (Heating mode) than the setting temperature, the
unit will be automatically quit the power management. The power management
indicator light turns dark and the compressor and (or) fan motor run.
