Gorenje KAM PD Series, Руководство пользователя

Страница: 32 / 138

14
INSTALLATION INSTRUCTIONS
Exhaust hose installation in to the wall
Not applicable to the units without adaptor A, expansion plugs and wooden screws.
Water drainage
Drain hose adaptor
Continuous
drain hose
Remove the
upper drain plug
1. Prepare a hole in the wall.
Install the wall exhaust adaptor
A onto the wall (outside) by
using 4 expansion plugs and
wooden screws, be sure to fix
thoroughly.
2. Attach the exhaust hose to wall
exhaust adaptor A.
NOTE: Cover the hole using the
adaptor cap when not in use.
The exhaust hose can be
compressed or extended moderately
according to the installation
requirement, but it is desirable to
keep the hose length to a minimum.
IMPORTANT:
DO NOT OVER
BENDTHE EXHAUST HOSE .
CAUTION: Make sure that there is
no obstacle around the air outlet of
the exhaust hose (in the range of
500mm) in order to the exhaust
system works properly.
Expansion plug
position
Adaptor A
Adaptor cap
•
During dehumidifying modes,
remove the upper drain plug from
the back of the unit, install the drain
connector (5/8 universal female
mender) with ¾ hose (locally
purchased). For the models without
drain connector, just attach the
drain hose to the hole. Place the
open end of the hose adaptor
directly over the drain area in your
basement floor.