Gorenje KAM PD Series, Руководство пользователя

Страница: 28 / 138

10
OPERATING INSTRUCTIONS
Operating instructions
COOL operation
1. Press the "MODE" button until the "COOL" indicator light comes on.
2. Press the ADJUST buttons "+" or "- " to select your desired room
temperature. The temperature can be set within a range of 17°C – 30°C.
3. Press the "FAN SPEED" button to choose the fan speed.
HEAT operation (cooling only models without)
1. Press the "MODE" button until the "HEAT" indicator light comes on.
2. Press the ADJUST buttons "+" or "-" to select your desired room
temperature. The temperature can be set within a range of 17°C - 30°C.
3. Press the "FAN SPEED" button to choose the fan speed. For some models,
the fan speed cannot be adjusted under HEAT mode.
DRY operation
1. Press the "MODE" button until the "DRY" indicator light comes on.
2. Under this mode, you cannot select a fan speed or adjust the temperature.
The fan motor operates at LOW speed.
3. Keep windows and doors closed for the best dehumidifying effect.
4. Do not put the duct to window.
AUTO operation
1. When you set the air conditioner in AUTO mode, it will automatically select
cooling, heating (cooling only models without), or fan only operation
depending on what temperature you have selected and the room
temperature.
2. The air conditioner will control room temperature automatically round the
temperature point set by you.
3. Under AUTO mode, you cannot select the fan speed.
FAN operation
1. Press the "MODE" button until the "FAN" indicator light comes on.
2. Press the "FAN SPEED" button to choose the fan speed. The temperature
cannot be adjusted.
3. Do not put the duct to window.
TIMER operation
1. When the unit is on, press the Timer button will initiate the Auto-off stop
program, the TIMER OFF indicator light illuminates. Press the UP or down
button to select the desired time. Press the TIMER button again within 5
seconds, the Auto-on start program is initiated. And the TIMER-ON indicator
light illuminates. Press the up or down button to select the desired Auto-on
start time.
2. When the unit is off, press the Timer button to initiate the Auto-on start
program, press it again within five seconds will initiate the Auto-off stop
program.