Gorenje IDT 9640 X, Инструкция по эксплуатации

Страница: 8 / 15

8
You are now a user of the newest generation kitchen extractor hood of IDT 9640 X type.
This hood has been designed and manufactured specially with a view to satisfying your expectations and
it will certainly constitute a fitting element of a modern kitchen. The modern structural solutions and the
newest technologies used in production of this hood guarantee its high effectiveness and good appearance.
Please read these instructions carefully before installing the hood. They will make you avoid mistakes
during installation and operation of the hood.
We wish you a lot of satisfaction from choosing our kitchen extractor hood.
CONTENTS
I Characteristics
II Components
III Technical data
IV Operating conditions
V Installation
1. Installation of the wall hanger
2. Installation of the hood
3. Connecting to the power network and operation check
4. Setting the operation mode of the kitchen extractor hood
4.1. Setting the air extractor mode of operation of the hood
4.2. Setting the odour absorber mode of operation of the hood
4.3 Fan speeds
VI Operation and maintenance
1. Operational safety
2. Operation
2.1. Control panel
2.2. Program function
3. Maintenance
3.1. Metal grease filters
3.2. Carbon filter
3.3. Lighting
3.4. Cleaning
NOTE:
Before installing the hood purchase appropriate expansion plugs / dowels (4 pcs)
for the structure of the ceiling in which the hood will be mounted.
I Characteristics
Kitchen extractor hoods IDT 9640 X was designed to remove kitchen fumes. It requires installation of a
conduit discharging used air to the outside. The conduit (usually a pipe Ø150 or 120 mm) shall not be longer
than 4-5 m. The hood can operate as an odour absorber after installation of an active carbon filter. In such
case a conduit discharging used air to the outside is not necessary, but it is recommended to install an air
exhaust guide.
The kitchen hood is an electrical appliance manufactured according to class I of shock protection.
It has its own lighting and an exhaust fan which can be set to one of four rotational speeds.
The hood was designed for permanent installation on a vertical wall over a gas or electric cooker.