170687
Instructions for Use, Building- in and Connecting
13
Conversion to another type of gas
•
For the conversion procedure the appliance
need not be pulled out from its location.
•
Before starting to work on conversion,
disconnect the appliance from the mains and
shut the gas inlet valve.
•
Replace the existing nozzles of declared
nominal heat input with adequate nozzles for
the new type of gas (see table).
•
Adjust the nozzle for the minimum heat input
rate as long as it requires to arrive at the
minimum heat input; If the appliance needs to
be adjusted to liquid propane/butane gas, the
regulation valve for the minimum thermal load
must be tightened to the end.
•
Never unscrew nozzles for minimum heat input
rate for more than 1,5 turn.
Cooking burner (fig.1)
1
Burner crown cap
2
Burner crown
with burner cap
support
3
Thermal probe
(certain models
only)
4
Ignition plug
5
Nozzle
Setting elements
To provide access to the setting elements:
•
Remove the cooktop grid and burner crowns
with caps,
•
The setting elements of the double burner are
accessible behind the protective plate of the
main nozzle.
•
Remove the control knobs along with the seal
gaskets.
Gas faucet (fig.2)
Minimum heat input setting screw
1
2
