background image

170687

Instructions for Use, Building- in and Connecting

12

Connecting the cooktop to the gas supply

Safety precautions

The appliance must be connected in
accordance with the standing ragulations, and it
may be used only in well ventilated rooms.
Before any attempt to connect the appliance
read carefully the instructions!

Before installation and connection check if the
local connection specifications (type and
pressure of gas) correspond to the
specifications of the appliance.

The technical specifications of the appliance
are indicated upon the rating plate.

The appliance is not suitable for connection to
the vapour release channel (chimney). The
appliance must be installed and connected in
accordance with the standing regulations.
Special attention must be paid to the particular
ventilation requirements.

Connections

The bottom of the appliance is equipped with
the liquefied gas connection with an exterior
thread ISO 228-G1/2, or with the natural gas
connection with a thread EN 10226-1 / -2 or EN
ISO 228-1 (Depending on the country-specific
connection regulations.) R1/2

The appliance is supplied with the liquid gas
connection and the non-metallic seal gasket.

During the installation the elbow R ½ should be
gripped tight to prevent twisting.

Use only non metal gaskets for connection
sealing. Seals may be used only once.

To provide sufficient connection tightness of
seals tighten the nuts with the moment of 18
Nm.

Connect the appliance to the liquid gas supply
by means of approved flexible hose.

The hose may not touch the mobile parts of the
kitchen elements (f.e. the drawers) and should
move freely.

Connect the appliance in accordance with the
regulations of the local gas supplier.

Important!

 Check all the connections for

tightness after the installation!

Liquefied gas connection

  9

 Pipe coupling for

     liquefied gas
     (Depending on the
     country-specific
     connection
     regulations.)

10

 Gasket

11

 EN 10226-1 / -2 or

     EN ISO 228-1
     (Depending on the
     country-specific
     connection
     regulations.) R1/2
     connection

Содержание GCS64C













Отзывы: